The Propel Prop Indexer simplifies aligning the prop for raising the drive. The spring-loaded Indexer works by a pivotal fin which drops down from the drive shaft, blocking the prop from rotating, and aligning it to be raised thru the hull.
The Slider Latch, in conjunction with the Latch Plate (not included), locks in the Propel unit thwart tube and locks the unit in the down position during use. The Slider Latch is designed to break if hit to protect the drive unit, so carry extras!
To keep your Propel Pedal Drive (patent pending) operating in peak condition, you should keep it clean and periodically add lubricant to the crank. This kit includes the tools and lubricant used in the general maintenance needed to ensure optimal performance for the lifetime of your Propel system(patent pending).
- Includes 3.5 oz. of Teflon lubricant, pump with extended nozzle and 3/16" allen key to access fill port
The Native Watercraft Propel Easy Cruz Kit is a high efficiency propeller that optimizes pitch and rake adjustments to give the propel drive unit a 50% increase in efficiency while maintaining the same top end speed the Propel Drive is revered for. Native has also added a power boat like shear pin system to protect your drive system in case the blades strike anything while spinning.
- Increased efficiency with no speed loss
- Powerboat-like sheer pin system to protect the blades from impact damage
The Propel Drive Lower Transmission Rebuild Kit increases efficiency and performance of well used drives. Includes Propeller Cartridge, Bearings, Lower Transmission Gear, and O-Ring.